Water Fittings - Ball-Bearing STC / Garrett Turbochargers

Water Fittings - Ball-Bearing STC / Garrett Turbochargers
Product Code: waterfittingSTCDBB
Availability: In Stock
Price: $30.00

Available Options


* Water Fitting Options:

Qty:     - OR -   Add to Wish List
Add to Compare

Garrett Ball Bearing Turbocharger Water Fittings

These water fittings are made of blue zinc-coated Stainless steel to fit into all STC, GT-R, GTX and GTW Ball-Bearing turbos that use the required  water fitting system.  These fittings are14mm to -6AN conversion to fit with many water line kits that use a -6AN female end. These fittings include rubber-lined steel washers. Price is for one pair of fittings.  

Please Note the following: 

-The 14mm to -6AN is designed to be completely flush with the flange to the water jacket of the Ball-bearing turbocharger. 

-DO NOT use silicon sealants or teflon tape with these fittings onto the water jacket. The ends are tapered and include a brass / rubber sealing washer for each side.

- These are best used with STC Ball-Bearing conversion and GTW Ball-bearing conversion CHRAs, and allow ample room for 90 degree female -6AN fitment.  However, If you are using a GT-R or GTX based turbocharger (i.e. GTX3071R, TR3030R, Interceptor R, etc) it is best to use the Banjo style fitting kit, due to the reduced size of the CHRA which allows less access to 90 degree fittings using a 14mm to -6AN.

-These fittings work only with Garrett and Garrett hybrid turbochargers.  They will not work with Turbonetics, Precision or Borg-Warner Turbochargers. Please e-mail us for questions regarding which size is needed for these applications